Thermoplastic Actuated Valves
| |
Ball valves, butterfly valves, diaphragm valves, and gate valves are often automated with pneumatic or electric actuators. This allows remote operation for a variety of reasons: labor savings, plant safety, product quality assurance, and automatic sequencing. The choice of actuator type depends on many factors, including availability of air supply, cycling requirements, condition of the environment, compatibility with the type of control operation, and cost. Positioners may be mounted on these valves if flow control is required.
|
 |
Characteristics:
Quarter turn valve with hyperbolic flow characteristic, low pressure drops and reliable sealing. Poor flow control, typically used in on/off applications with very little to no suspended solids. Multiport valves used for diverting, splitting lines and mixing.
Operation:
Electrical actuation (all sizes) or Pneumatic actuation (all sizes)
|
Size:
¼” – 4”*
*6” end connections available for 4" valve body
Body:
PVC/CPVC/PP/PVDF
Seals:
EPDM/FKM
|
Body Type:
Single piece/True Union
End Connections:
Socket, threaded, flanged, butt (PP/PVDF)
|
|
|
Characteristics:
Quarter turn valve with equal percentage type flow characteristic. Moderate flow control, can be used for both on/off and modulating service. Good tolerance to suspended solids but not recommended for use with slurries or debris.
Operation:
Electrical actuation (1 1/2" - 24") or Pneumatic actuation (1 1/2" - 24")
|
Size:
1 ½” – 48”
Body:
PVC/PP/PVDF/PDCPD
Seals:
EPDM/FKM/Nitrile
|
Body Type:
Wafer/Lug body
End Connections:
Flanged
Disc:
PVC/CPVC/PP/PVDF/PDCPD
|
|
|
Characteristics:
Multi turn valve with linear type flow characteristic. Good flow control, can be used for both on/off and modulating service. High tolerance to suspended solids, excellent for slurry service and high resistance to clogging due to debris. Bonnet can be removed for cleaning out valve.
Operation:
Electrical actuation (1/2" - 4") or Pneumatic actuation (1/2" - 10")
|
Size:
1/2" - 4" Electric or 1/2" - 2" Pneumatic
Body:
PVC/CPVC (1/2" - 4")/PP/PVDF
Diaphragm
EPDM/FKM/Nitrile/PTFE 3-layer
|
Body Type:
True union (1/2" - 2" socket/threaded)/Single piece
End Connections:
Flanged/Socket/Threaded/Butt (PP/PVDF)
|
|
|
Characteristics:
Operation:
Electric 1-1/2" - 3"
|
Size:
1-1/2" - 3"
Body:
High Impact PVC
Seals:
EPDM (FKM optional)
|
Body Type:
Single piece
End Connections:
Flanged
|
 |
Characteristics:
Operation:
Pneumatic or Electric
|
Size:
1/2" - 4"
Body:
PVC,PP,PVDF and PTFE
Seals:
FKM, EPDM and encapsulated FKM
|
Body Type:
Single piece
End Connections:
Flanged
|
 |
Fast Packs ship within 24 hours from time of order!*
|
Available configurations:
Electric
- Series 94 or 92 on Type-21 Ball Valve
- Series 94 or 92 on Type-57P Butterfly Valve
- Series 83 on Type-21 Ball Valve
- Series 17 on Type-21 Ball Valve
- Series 17 on Type-57P Butterfly Valve
|
Pneumatic
- Series 79 Air-to-Air on Type-21 Ball Valve
- Series 79 Air-to-Spring on Type-21 Ball Valve
- Series 79 Air-to-Air on Type-57P Butterfly Valve
- Series 79 Air-to-Spring on Type 57P Butterfly Valve
|
|
*Fast Pack delivery times may vary based on availability and inventory. Every effort will be made to meet our 24-hour shipping goal. Fast Pack items ordered with other Asahi/America products may affect delivery. Fast Packs should be ordered separately to ensure expedited manufacturing and shipping priority.
|
|
|
