Manual Plastic Gate Valve Options
Chain Operators for Gate Valves
A chain operator is designed to be mounted to the handwheel of a gate valve. The chain operator is used for operating the valve in an overhead location where the hanging looped chain is accessible. A lock-link looped chain is fed through one side of the operator and out the other, then joined continuous by using the Masterlink or by mechanical fastening. By pulling on the chain, the valve handwheel is activated to turn the non-rising valve stem either counter-clockwise to open or clockwise to close the valve. Chain operators can be factory or field installed on Asahi/America gate valves.
Resources
Data Sheet