header valves
Valves & Actuation
Peaktronics 92

Peaktronics Positioner

The DHC-100 positioner is a high performance, high resolution digital positioner. A simple three button control is used to configure ALL parameters that the unit needs for a variety of applications, and eliminates the need for special meters and/or tools for calibration. As long as there is supply power, the unit can easily be field calibrated.

This positioner can be calibrated for various command types (such as 4-20mA, 1-5VDC, 0-5VDC, 0-10VDC, or digital) and also the default operation upon loss of command (such as fail open, fail close, or fail as is). The optional transmitter/auxiliary switch module is installed into the positioner card via plug and socket. This allows a user defined feedback signal of current or voltage, and provides 3-SPSt relay contacts for open position, closed position, and a fault condition.

 

New DHC postioner - Gen II

New Peaktronics Position

Please note: The new Gen II DHC positioner can be easily identified with three LED's located at the bottom of the positioner. The old style does not have any LED's.

Click here to get a copy of the O&M Manual for the new positioner

Ideal Applications Include:

Precise throttling

Specifications

Power Requirements:

DHC-100: 117VAC +/- 10%, 50/60 Hz, 12 VA typical (not including output load)

Fuse Type:

5A TR5 Slo-Blo (replaceable)

Command Signal Input:

120 VAC 1Ph 50/60 Hz

Loss of command threshold:

<0.75V or >5.5V (1-5 VDC input), <3ma or >22mA (4-20mA input)

AC Motor Outputs:

Off-state Leakage Current: <15mA
Maximum Load Current @ 150C: 5A

Input Impedance:

20K ohms (1-5 VDC, 0-5 VDC, 0-10 VDC), 251 ohms +/-1% (4-20mA input)

Feedback Signal Input:

Input Voltage: 0 to 2.5VDC
External Feedback Potentiometer: 1K ohm

Power Supply Inputs:

+15V OUT (J2-8): 125mA maximum (not including option module)
+5V OUT (J2-7): 5mA maximum
NOTE: Do not connect these outputs to other power supplies

Environmental

Operating Temperature Range: 32F to 150F
Storage Temperature Range: -40F to 185F
Relative Humidity Range: 0 to 90% (noncondensing) 

Features/Benefits

  • High resolution
  • Simple pushbutton calibration
  • Calibrated as standard or reverse acting
  • Multi-meter not required for potentiometer calibration
  • Options to install into positioner via plug and socket
  • Selectable fail position for loss of input signal: fail open, fail close, or fail as is
  • Selectable input signal: 4-20mA, 1-5VDC, 0-5VDC, 0-10VDC, or digital
  • Loss of command and feedback potentiometer fault detection
  • Motor stall detection will sense when the motor has reached a stall condition and remove power from the motor