header valves
Valves & Actuation
Series 92 on Type 57 Fast Pack

Electric Series 92 on Type-57 Butterfly Valve

The Series 92 Electric Actuator is suitable for butterfly valves up to 8" in size (The Series-10 covers sizes larger than this).

Ideal Applications Include:

Locations with no air supply or colder temperatures

Specifications

Sizes:

S92, A92, B92, C92

Voltage:

120 VAC 1Ph 50/60 Hz

Conduit Entry:

Two ½" NPT

Switches:

Two Single Pole, double throw (SPDT), 15 Amp Rated

Torque:

400-2000 in-lbs

Amp Draw:

S92, B92 0.5A; A92 0.8A; C92 1.0A

Max Ambient Temperature:

150°F

Cycle Time per 90°:

S92, A92: 15 seconds appx.; B92, C92: 32 seconds appx.

Features/Benefits

  • Motor: Reversing, brushless, capacitor run 115 VAC 50/60 Hz, single phase
  • Overload Protection: Integral thermal overload protection for motor winding with automatic reset
  • Gear Train: Permanently lubricated, solid gear that is Rockwell hardened
  • Corrosion Resistant Housing: thermally bonded baked powder coating with stainless steel trim
  • ISO mounting configuration
  • Conduit: Two ½" NPT conduit entries to eliminate cross feed between control, feedback, and power signals
  • Position Indication: Highly visible beacon position indicator for positive indication of valve position, even at a distance
  • Declutchable Manual Override: Pull up on indicator knob, insert 5/8" wrench onto flats and rotate in the appropriate direction (CCW for open, CW for closed). Models with handwheel override do not require a wrench. Simply push down on handwheel until engaged with cam and rotate.
  • Limit Switches: Standard End of travel limit switches can be used for light indication (not to be used with PLC for position confirmation)
  • Enclosure: Combination Type 4X, 7, and 9 enclosure for use in various environments.
  • Corrosion Resistant Mounting: Mounting is with PPG or stainless steel bracket, stainless steel coupling, and stainless steel hardware
  • CE Compliant Motor: All 115VAC and 230VAC motors are CE compliant and stamped as such
  • Extended Duty Cycles: Our extended duty cycles are ideal for modulating and high cycling applications
  • Output Torque: Series 92 Electric Actuators have an output torque range from 400 in-lbs to 2,000 in-lbs
  • RoHS Compliant

Options

  • Auxiliary (additional) limit switches
  • Feedback potentiometer
  • Heater and thermostat
  • Positioner (modulating PCB)
  • Mechanical Brake
  • Transmitter
  • Cycle Length Control Module
  • Two-wire control
  • Failsafe Battery Backup (Protek)
  • Additional Voltages
  • Local Remote Station
Another CP Solved Logo