Page Category: Actuators

Series 79 PAG
Click to enlarge

    Page Category: Actuators

    Series 79 PAG pneumatic actuators have a glass-reinforced polyamide housing for chemical resistance and high strength. The actuator functions using a double piston rack and pinion arrangement for a smooth torque profile throughout the actuator stroke. Air-to-spring models feature a concentric spring set for consistent output torque. The base of the actuator has an ISO output drive and bolt circle for easy mounting to quarter turn valves. The top of the actuator has a visual position indicator and a NAMUR mounting pad to accommodate mounting accessories. The air ports are 1/4″ NPT and have a NAMUR bolt pattern to accommodate flush mount solenoids.

    Resources:

    Data Sheets

    Ideal Applications Include:

    Chemical Processing, Bleach Plants, Aquariums, Mining, Water Treatment, Landfills, Swimming Pools, Power Plants

    Specifications:

    Torque:

    58 to 1,335 in-lbs

    Materials:

    Glass-reinforced polyamide housing, stainless steel shaft and hardware

    Models:

    Air-to-air
    Air-to-spring (fail closed)
    Air-to-spring (fail open)

    • Actuator body and end caps constructed of glass-filled polyamide
    • Double piston, rack and pinion operation
    • 80psi to 120psi recommended operating pressures
    • Fail positions can be specified for air to spring actuators
    • Visual position indicator
    • -25° F to 195° F operating temperature range
    • 1/4″ NPT air connections
    • ISO output drive and bolt pattern for easy mounting
    • NAMUR accessory mounting
    • Outout shaft is 300 stainless steel
    Series 79P/PA
    Click to enlarge

      Page Category: Actuators

      Series 79P/PA pneumatic actuators have an aluminum housing with cataphoresis and Rilsan coating for chemical resistance. Air-to-spring models feature pre-loaded springs that safely avoid potential hazards during maintenance. The actuator functions using a double piston rack and pinion arrangement for a smooth torque profile throughout the actuator stroke. The base of the actuator has an ISO output drive and bolt circle for easy mounting to quarter turn valves. The top of the actuator has a visual position indicator and a NAMUR mounting pad to accommodate mounting accessories. The air ports are 1/2″ NPT and have a NAMUR bolt pattern to accommodate flush mount solenoids.

      Resources:

      Data Sheet

      Ideal Applications Include:

      Chemical Processing, Bleach Plants, Aquariums, Mining, Water Treatment, Landfills, Swimming Pools, Power Plants

      Specifications:

      Type:

      Double piston, double rack and pinion

      Models:

      Air-to-air
      Air-to-spring (fail closed)
      Air-to-spring (fail open)

      Air Supply:

      60psi – 120psi

      Bodies:

      Cataphoresis and Rilsan-coated aluminum body and end caps

      Torque:

      59 to 40,710 in-lbs

      Air Connections:

      1/4″ NPT

      Mounting Dimensions:

      ISO and NAMUR

      • Cataphoresis and Rilsan-coated aluminum body and end caps
      • Double piston, double rack and pinion
      • ISO valve mounting pattern
      • ISO female star output drive
      • NAMUR accessory mounting pattern
      • 80psi (recommended) to 120psi (maximum) filtered air supply
      • Spring return models have cataphoresis coating, or chromium passivation for spring protection
      • End position adjustable travel stops
      • Polyacetal or PTFE/bronze piston guides
      • Self-lubricating BUNA-N o-ring seals
      • -25° F to 195° F temperature range
      • 1/4″ NPT air connections
      • Available in air-to-air (double acting) and air-to-spring (single acting, or spring return failsafe) models
      • Position indication through visible indicator knob and flats on actuator shaft
      • Output shaft constructed of cataphoresis coated steel
      Series 17 Compact Electric Actuator
      Click to enlarge

        Page Category: Actuators

        The Series 17 electric actuator features a reversing motor with multi-voltage capabilities; 85 VAC-265 VAC (50/60Hz), 24 VDC. An internal heater, auxiliary switches, and two position indicating LED’s are standard equipment. Additional features include a permanently lubricated steel gear train, NEMA Type 4 & 6 enclosure with a thermally bonded powder coat finish, declutchable manual override, visual mechanical position indication, ISO bolt circle, and flying leads. The Series 17 can be mounted to Asahi/America’s Type-21 ball valve and Type-57P butterfly valves.

        Resources:

        Data Sheets

        Specifications:

        AMP Draw:

        0.45

        Limit Switches:

        2-SPDT end of travel switches
        2-SPDT dry contact switches

        Torque:

        350 in-lbs

        Wiring:

        1.2M flying leads

        Heater:

        .5W

        Voltage:

        85-265 VAC single phase, 24 VDC

        Max Ambient Temperature:

        150° F

        Cycle Time per 90 degree:

        12 seconds

        • Size: Compact, lightweight
        • Motor: Low current, reversing DC motor
        • Multi-voltage: 85-265 VAC single-phase, 24 VDC
        • Overload Protection: Electric motor cuts out at 2 Amps
        • Gear Train: Permanently lubricated solid gearing
        • Corrosion Resistant Enclosure: Thermally bonded powder coat finish
        • Position Indication: Mechanical dial indication
        • LEDs: Open and close LED position indication (red/closed, blue/open)
        • Declutchable Manual Override: Push down override button and use provided lever to manually position in the event of no power
        • Auxiliary Limit Switches: Dry contact switches for open and close positions
        • Enclosure: Combination NEMA Type 4X and 6 enclosure with captive cover screws
        • Electrical Connections: Sealed cable gland with 1.2M flying leads
        • Space Heater: Standard equipment
        • ISO Mounting: F03, F04, F05 X 14mm star
        Series 10
        Click to enlarge

          Page Category: Actuators

          The Series 10 electric actuator is used to actuate Asahi’s larger valves, including butterfly valves up to 24″.

          Resources:

          Data Sheet

          Ideal Applications Include:

          Locations with no air supply, colder temperatures, larger valves, limited submergence applications

          Specifications:

          Torque:

          1,320 – 26,040 in-lbs

          Conduit Entry:

          Two (2) 3/4″ FNPT

          Limit Switches:

          Four (4) single pole, double throw (4-SPDT) 10 Amp rated

          Torque Switches:

          Two (2) single pole, double throw (4-SPDT) 10 Amp rated

          Voltage:

          120 VAC 1Ph 50/60 Hz (others available)

          Amp Draw:

          1.65 – 4.10

          Max Ambient Temperature:

          150º F

          Cycle Time per 90º:

          21– 31 seconds

          • Motor: Reversing, squirrel cage induction motor, 120 VAC 50/60 Hz, single phase
          • Overload protection: Integral thermal overload protection for motor windings with automatic reset
          • Gear train: Permanently lubricated
          • Conduit: Two 3/4″ FNPT conduit entries to eliminate cross feed between control and power signals
          • Declutchable manual override: Lockable declutching lever with handwheel
          • Limit switches: Standard end of travel limit switches can be used for light indication (not to be use with PLC for position confirmation)
          • Auxiliary (Additional) limit switches: Each electric actuator is provided as a standard with 2-SPDT auxiliary limit switches
          • Torque Switches: 2-SPDT Torque switches
          • Mechanical Stops: Two +/- 10% mechanical travel stops
          • Enclosure: Type 4X & 6
          • AWWA C542: Conforms to AWWA C542
          • Self-Locking: Self-locking worm gear design eliminates the need for a mechanical brake
          • Space Heater: A space heater is provided as standard equipment
          • Output torque: Series 10 Electric Actuators have an output torque range from 1,320 in-lbs to 10,440 in-lbs
          • Corrosion resistant mounting: Mounting is with stainless steel bracket, stainless steel coupling, and stainless steel hardware
          Series 92 Quarter Master Chief
          Click to enlarge

            Page Category: Actuators

            The Series 92 electric actuator is our primary electric actuator for most butterfly valves, and our larger ball valves, as well as multi-turn diaphragm and gate valves. The Series 92 features include 2-SPDT switches, output 400 in/lbs to 2000 in-lbs torque, conduit 1/2 NPT.

            Resources:

            Data Sheets

            Ideal Applications Include:

            Remote locations, locations with no air supply, colder temperatures, larger valves

            Certifications:

            ABS Logo UL Logo

            Specifications:

            Sizes:

            S92, A92, B92, C92

            Torque:

            400-2000 in/lbs

            Voltage:

            120 VAC 1Ph 50/60 Hz (others available)

            Amp Draw:

            S92, B92 0.5A; A92 0.8A; C92 1.0A

            Conduit Entry:

            Two 1/2″ NPT

            Max Ambient Temperature:

            150º F

            Switches:

            Two single pole, double throw (SPDT) 15 amp rated

            Cycle Time per 90º

            S92, A92: 15 seconds appx.; B92, C92: 32 seconds approx.

            • Motor: Reversing, brushless, capacitor run 120 VAC 50/60 Hz, single phase.
            • Overload Protection: Integral thermal overload protection for motor winding with automatic reset.
            • Gear Train: Permanently lubricated, solid gear that is Rockwell hardened.
            • Corrosion Resistant Housing: thermally bonded powder coat finish.
            • ISO mounting configuration
            • Position Indication: Highly visible beacon position indicator for positive indication of valve position, even at a distance.
            • Declutchable Manual Override: Pull up on indicator knob, insert 5/8″ wrench onto flats and rotate.
            • Enclosure: Weatherproof NEMA Type 4X.
            • CE Compliant Motor: All 115VAC and 230VAC motors are CE compliant and stamped as such.
            • Extended Duty Cycles: Our extended duty cycles are ideal for modulating and high cycling applications.
            • ABS Product Type Approved for use in Marine and Offshore Applications
            Series 94 Quarter Master
            Click to enlarge

              Page Category: Actuators

              The Series 94 electric actuator is a basic electric actuator designed for smaller (generally up to 4″) quarter-turn valves, and is a good low-cost alternative to larger electric actuators. The Series 94 actuators have a thermally protected, bi-directional, capacitor run motor with a permanently lubricated gear train. Because of their size, the Series 94 actuators have a short open/close time, approximately 5 seconds, and a weight of only 3.5 lbs.

              Resources:

              Data Sheets

              Ideal Applications Include:

              Remote locations, locations with no air supply, colder temperatures, smaller valves, low cost applications

              Certifications:

              UL Logo

              Specifications:

              Sizes:

              A94, B94

              Voltage:

              120 VAC 1Ph 50/60 Hz (others available)

              Conduit Entry:

              Two (2) 1/2″ NPT

              Switches:

              Two (2) single pole, double throw (2SPDT) 15 amp rated

              Torque:

              150-300 in-lbs

              Amp Draw:

              A94 .5A, B94 .8A

              Max Ambient Temperature:

              150º F

              Cycle Time per 90º

              A94, B94: 5 seconds

              • Motor: Reversing, brushless, capacitor run 120 VAC  50/60 Hz, single phase
              • Overload protection: Integral thermal overload protection for motor windings with automatic reset
              • Gear train: Permanently lubricated
              • Corrosion resistant housing: Zytel FR50 engineered resin with stainless steel trim
              • ISO mounting configuration
              • Conduit: Two 1/2″ NPT conduit entries to eliminate cross feed between control, feedback, & power signals
              • Position indication: Highly visible position indicator for positive position of valve, even at a distance
              • Declutchable manual override: Push down on handle and rotate in the appropriate direction (CCW for open, CW for close)
              • Limit switches: Standard end of travel limit switches can be used for light indication (not to be use with PLC for position confirmation)
              • Corrosion resistant mounting: Mounting is with PPG or stainless steel bracket, stainless steel coupling, and stainless steel hardware
              • CE compliant motor: All 120 VAC and 220 VAC motors are CE compliant and stamped as such
              • Extended duty cycles: Our extended duty cycles are ideal for modulating and high cycling applications
              • Output torque: Series 94 Electric Actuators have an output torque range from 150 in/lbs to 300 in/lbs
              • Enclosure: Type 4X
              • RoHS compliant